Today we will show you how to configure Load Sharing 2 WAN and 1 LAN detail as bellow:
1. Comment Interface
2. Create Bridge LAN
3. Configure IP Address for WAN1 and WAN2
4. Configure IP Address for Bridge LAN
5. Configure DNS Server
6. Configure DHCP Server
7. Configure Mangle
8. Configure Routes
9. Configure NAT
10. Add Port to Bridge LAN
In this configuration we use MikroTik RB1100AHx2 with Firmware 6.41.
1. Comment Interface
2. Create Bridge LAN
3. Configure IP Address for WAN1 and WAN2
4. Configure IP Address for Bridge LAN
5. Configure DNS Server
6. Configure DHCP Server
7. Configure Mangle
8. Configure Routes
9. Configure NAT
10. Add Port to Bridge LAN
I must appreciate you for this superb post
ReplyDelete